一、特點 Features
我們都知道鼓型橡膠護舷,是由橡膠護舷本體、鋼制防沖板和貼面板(鋼結構)組合而成的;我公司生產的鼓型橡膠護舷,其具有以下這些特點:
Cell rubber fender consists of rubber fender body , steel frame and frontal pads;Cell rubber fender has following advantages:
1、形狀設計較為合理,其具有更高的應力分散性,壓縮變形量可達到55%,使用壽命長;
Reasonable shape-design and higher strees dispersion , the compression deflection can reach
up to 55%, and in long life servies;
2、在單位反力的情況之下,護舷吸能量肯定較高的;
Higher energy absorption under the condition of unit reaction force;
3、當我們船在傾斜靠泊的時候,斜向靠泊性能變化相對變??;
Little performance decreasing deflction just as the fender is compressed when vessel is
angle berthing;
4、護舷頂部面積大,安置防沖板,大大減少作用于船舶傍板的面壓力,即降低面壓;
Steel frame can be installed on the top of the fender owing to its large area , which can
reducing the surface pressure when vessel berths;
5、鋼結構(防沖板)上安裝塑料貼面板,摩擦系數小,降低了靠泊剪切力;
Low coefficient of friction as UHMW-PE boad is installed on the steel structure(steel frame)
reduces shear stress when vessel is berthing ;
6、本系列的鼓型橡膠護舷可以有效地停靠從50000~300000DWT級的大型船舶。
Cell rubber fender series suitable for gigantic shippings of 50000~300000DWT to be berthing.
序號 | 配件名稱 | 零 件 | 材 料 |
1 | 防沖板 | 1) 鋼結構 | Q235、Q345、 船用C板 |
2) 貼面板 | UHMW-PE | ||
3) 貼面板緊固螺栓 | 1Cr18Ni9、304 | ||
2 | 預埋件 | 1) 螺栓 | 2Cr13、1Cr18Ni9、304、SUS316 |
2) 墊片 | 2Cr13、1Cr18Ni9、304、SUS316 | ||
3) 預埋套筒(預埋螺母) | 2Cr13、1Cr18Ni9、304、SUS316 | ||
4) 地腳桿 | Q235 | ||
5) 地腳板 | Q235 | ||
3 | 防沖板連接件 | 1) 螺栓 | 2Cr13、1Cr18Ni9、304、SUS316 |
2) 墊片 | 2Cr13、1Cr18Ni9、304、SUS316 | ||
3) 螺母 | 2Cr13、1Cr18Ni9、304、SUS316 | ||
4 | 預埋U型環(拉環) | Q235、2Cr13、1Cr18Ni9、304、SUS316 | |
5 | 預埋安裝定位板 | Q235 | |
6 | 橡膠彈簧鏈 | Q235、20Mn | |
7 | 重力鏈(拉鏈) | Q235、20Mn |
注:除以上所列材料外,亦可根據用戶要求進行調整。